New products!

Hi ,

This week's new product email is all about displays. We've got new cases for the official Raspberry Pi touch displays, some display+enclosure combos, and even some ESP display boards to add in to the mix.

Raspberry Pi displays are perfect for running a...

🏠 Smart home dashboard

🎵 Media player interface

🖥️ RPi OS Desktop display

🤖 Robotics control panel

📷 Photo frame

📈 Sensor monitor

🛍️ Kiosk

...and more! There is no shortage of weird and wonderful ways to use a Pi with a display.

Argon Industria HMI 7C

A premium metal enclosure for the 7" Raspberry Pi Touch Display 2, designed for panel or VESA mounting (display not included).

The solid aluminium body acts as a passive heatsink, especially if you fit the optional thermal column, dragging heat away from your Pi 5's CPU.

Inside is a re-routing PCB, bringing HDMI (full-size!) and USB-C in-line with the USB and Ethernet ports, exiting at the side. Punch-outs allow passing your own wires from HATs/GPIO if required.

...and a 5" version!

There aren't many enclosures for the 5" official display, so it's great to see Argon have designed a smaller option to cater for it.

Same specs, features, and lush aluminium body, just a couple of inches smaller, and the main ports exit from underneath instead.

Argon Industria HMI 8CS

The 8CS is a little different, as it includes the enclosure and display in an all-in-one combo, ready for you to install your Raspberry Pi 5.

This version features an 8" 1280x800 10-point touch DSI display, wrapped in the same style of solid aluminium enclosure.

Great for those who don't yet have a display, or need a larger panel for their project.

...and a 10" version!

The 10CS is just like the version above, but even bigger with a 10" display this time - for large displays, lots of data and busy dashboards!

Includes a 10" 1280x800 10-point touch DSI display and aluminium enclosure.

Waveshare 10" Display + Enclosure for Pi 5/4

A similar take from Waveshare here, with a 10" 1280x800 IPS capacitive 10-point touch display combined with an aluminium enclosure, also for panel or VESA mounting.

The key differences are the 5MP camera built-in to the display, the screw terminal power input option, and debug port access. It also offers wider compatibility, as it supports both Pi 5 and Pi 4.

We also stock an 8" version.

ESP32-S3 3.5" Touch Display Dev Board

Too much to mention here but let's have a go - an ESP32-S3 dev board with a 3.5" IPS capacitive touch display, LiPo charging, 6-axis IMU, SD slot, microphone, speaker/camera options and more. Shut up and take my money!

The options are a bit quirky with this one. You can have the board with a speaker, or the board in a case with a camera module. You can't have it any other way - this isn't Burger King!

M5Stack DinMeter v1.1

The latest v1.1 M5Stack DinMeter is here, upgraded with a Stamp-S3A

(ESP32-S3) controller.

It's designed to fit a standard 1/32 DIN meter slot, or panel mount it into your own custom enclosure. It has a 1.14" display, rotary encoder with button/click, wide 6-36V voltage input, USB-C, Grove ports, and even comes with its own little LiPo battery.